Physical function as a marker to assess the effects of occupational long-term pesticide exposure.

In this cross-sectional study, we determined the relative impact of long-term occupational exposure to pesticides on physical performance and perception of tiredness. Experimental data was collected in locus from agricultural communities and included surveys to assess the duration of exposure to pesticides, social status, habitual physical activity levels, presence of common mental disorders (CMD), and self-reported tiredness. Plasmatic cholinesterase (PChE), body composition and traditional functional performance tests (Handgrip strength-HGS; Time up and go-TUG; and Sit-to-stand-STS) were obtained. From the 127 individuals tested, cluster analysis yielded 80 individuals divided in Direct Exposed (n = 37) and Indirect Exposed (n = 43); Tired (n = 16), and Not Tired (n = 64). PChE values were within the reference values (5209.64-13943.53 U/L). Pesticide exposure had no influence on PChE levels, CMD or fatigue (p > 0.05), while Self-reported tiredness had (p < 0.05). Principal Component Analyses showed that HGS; STS and TUG (i.e., physical performance variables) are negatively influenced by two independent factors: pesticide exposure and self-reported tiredness. We conclude that chronic pesticide exposure and tiredness can negatively impact physical performance, independently, without clinically significant changes in PChE levels that is a biomarker used to track pesticide intoxication. Functional physical tests can be a useful tool to identify chronic pesticide exposure, and help with the limitations of commonly used parameters (i.e. PChE and CMD). Self-reported tiredness is a confounding variable.

Personal protective equipment for preventing asbestos exposure in workers.

BACKGROUND: Asbestos exposure can lead to asbestos-related diseases. The European Union (EU) has adopted regulations for workplaces where asbestos is present. The EU occupational exposure limit (OEL) for asbestos is 0.1 fibres per cubic centimetre of air (f/cm3) as an eight-hour average. Different types of personal protective equipment (PPE) are available to provide protection and minimise exposure; however, their effectiveness is unclear. OBJECTIVES: To assess the effects of personal protective equipment (PPE), including donning and doffing procedures and individual hygienic behaviour, compared to no availability and use of such equipment or alternative equipment, on asbestos exposure in workers in asbestos demolition and repair work. SEARCH METHODS: We searched MEDLINE, Embase, CENTRAL, and Scopus (September 2022), and we checked the reference lists of included studies. SELECTION CRITERIA: We included studies that measured asbestos concentration outside and inside PPE (considering outside concentration a surrogate for no PPE), exposure to asbestos after doffing PPE, donning and doffing errors, nonadherence to regulations, and adverse effects of PPE. DATA COLLECTION AND ANALYSIS: Two review authors selected studies, extracted data, and assessed risk of bias using ROBINS-I. We categorised PPE as full-face filtering masks, supplied air respirators (SARs), and powered air-purifying respirators (PAPRs). Values for asbestos outside and inside PPE were transformed to logarithmic values for random-effects meta-analysis. Pooled logarithmic mean differences (MDs) were exponentiated to obtain the ratio of means (RoM) and 95% confidence interval (95% CI). The RoM shows the degree of protection provided by the respirators (workplace protection factor). Since the RoM is likely to be much higher at higher outside concentrations, we presented separate results according to the outside asbestos concentration, as follows. • Below 0.01 f/cm3 (band 1) • 0.01 f/cm3 to below 0.1 f/cm3 (band 2) • 0.1 f/cm3 to below 1 f/cm3 (band 3) • 1 f/cm3 to below 10 f/cm3 (band 4) • 10 f/cm3 to below 100 f/cm3 (band 5) • 100 f/cm3 to below 1000 f/cm3 (band 6) Additionally, we determined whether the inside concentrations per respirator and concentration band complied with the current EU OEL (0.1 f/cm3) and proposed EU OEL (0.01 f/cm3). MAIN RESULTS: We identified six studies that measured asbestos concentrations outside and inside respiratory protective equipment (RPE) and one cross-over study that compared the effect of two different coveralls on body temperature. No studies evaluated the remaining predefined outcomes. Most studies were at overall moderate risk of bias due to insufficient reporting. The cross-over study was at high risk of bias. Full-face filtering masks Two studies evaluated full-face filtering masks. They provided insufficient data for band 1 and band 6. The results for the remaining bands were as follows. • Band 2: RoM 19 (95% CI 17.6 to 20.1; 1 study, 3 measurements; moderate certainty) • Band 3: RoM 69 (95% CI 26.6 to 175.9; 2 studies, 17 measurements; very low certainty) • Band 4: RoM 455 (95% CI 270.4 to 765.1; 1 study, 16 measurements; low certainty) • Band 5: RoM 2752 (95% CI 1236.5 to 6063.2;1 study, 3 measurements; low certainty) The inside measurements in band 5 did not comply with the EU OEL of 0.1 f/cm3, and no inside measurements complied with the proposed EU OEL of 0.01 f/cm3. Supplied air respirators Two studies evaluated supplied air respirators. They provided no data for band 6. The results for the remaining bands were as follows. • Band 1: RoM 11 (95% CI 7.6 to 14.9; 1 study, 134 measurements; moderate certainty) • Band 2: RoM 63 (95% CI 43.8 to 90.9; 1 study, 17 measurements; moderate certainty) • Band 3: RoM 528 (95% CI 368.7 to 757.5; 1 study, 38 measurements; moderate certainty) • Band 4: RoM 4638 (95% CI 3071.7 to 7044.5; 1 study, 49 measurements; moderate certainty) • Band 5: RoM 26,134 (16,647.2 to 41,357.1; 1 study, 22 measurements; moderate certainty) All inside measurements complied with the current OEL of 0.1 f/cm3 and the proposed OEL of 0.01 f/cm3. Powered air-purifying respirators Three studies evaluated PAPRs. The results per band were as follows. • Band 1: RoM 8 (95% CI 3.7 to 19.1; 1 study, 23 measurements; moderate certainty) • Band 2: RoM 90 (95% CI 64.7 to 126.5; 1 study, 17 measurements; moderate certainty) • Band 3: RoM 104 (95% CI 23.1 to 464.1; 3 studies, 14 measurements; very low certainty) • Band 4: RoM 706 (95% CI 219.2 to 2253.0; 2 studies, 43 measurements; very low certainty) • Band 5: RoM 1366 (544.6 to 3428.9; 2 studies, 8 measurements; low certainty) • Band 6: RoM 18,958 (95% CI 4023.9 to 90,219.4; 2 studies, 13 measurements; very low certainty) All inside measurements complied with the 0.1 f/cm3 OEL when the outside concentration was below 10 f/cm3 (band 1 to band 4). From band 3, no measurements complied with the proposed OEL of 0.01 f/cm3. Different types of coveralls One study reported the adverse effects of coveralls. A polyethylene suit may increase the body temperature more than a ventilated impermeable polyvinyl (PVC) coverall, but the evidence is very uncertain (MD 0.17 °C, 95% CI -0.08 to 0.42; 1 study, 11 participants; very low certainty). AUTHORS' CONCLUSIONS: Where the outside asbestos concentration is below 0.1 f/cm3, SARS and PAPRs likely reduce exposure to below the proposed OEL of 0.01 f/cm3. For outside concentrations up to 10 f/cm3, all respirators may reduce exposure below the current OEL, but only SAR also below the proposed OEL. In band 5 (10 to < 100 f/cm3), full-face filtering masks may not reduce asbestos exposure below either OEL, SARs likely reduce exposure below both OELs, and there were no data for PAPRs. In band 6 (100 f/cm3 to < 1000 f/cm3), PAPRs may not reduce exposure below either OEL, and there were no data for full-face filtering masks or SARs. Some coveralls may increase body temperature more than others. Randomised studies are needed to directly compare PAPRs and SARs at higher asbestos concentrations and to assess adverse effects. Future studies should assess the effects of doffing procedures.

Impact of air quality on the health of present-day workers in an Asbestos roof manufacturing industry, Sri Lanka.

The study's objective was to determine the air quality in an asbestos-related industry and its impact on current workers' respiratory health. Seventy-seven air and 65 dust samples were collected at 5-day intervals in an asbestos roofing sheets production factory in Sri Lanka having two production facilities. Sampling was performed in ten sites: Defective sheets-storage, Production-plant, Pulverizer, Cement-silo, and Loading-area. A detailed questionnaire and medical screening were conducted on 264 workers, including Lung Function Tests (LFT) and chest X-rays. Asbestos fibres were observed in deposited dust samples collected from seven sites. Free chrysotile fibres were absent in the breathing air samples. Scanning Electron Microscopy confirmed the presence of asbestos fibres, and the Energy Dispersive X-ray analysis revealed Mg, O, and Si in depositions. The average concentrations of trace metals were Cd-2.74, Pb-17.18, Ni-46.68, Cr-81.01, As-7.12, Co-6.77, and Cu-43.04 mg/kg. The average Zn, Al, Mg, and Fe concentrations were within 0.2-163 g/kg. The highest concentrations of PM2.52.5 and PM1010, 258 and 387 µg/m3, respectively, were observed in the Pulverizer site. Forty-four workers had respiratory symptoms, 64 presented LFT abnormalities, 5 indicated chest irregularities, 35.98% were smokers, and 37.5% of workers with abnormal LFT results were smokers. The correlation coefficients between LFT results and work duration with respiratory symptoms and work duration and chest X-ray results were 0.022 and 0.011, respectively. In conclusion, most pulmonary disorders observed cannot directly correlate to Asbestos exposure due to negligible fibres in breathing air, but fibres in the depositions and dust can influence the pulmonary health of the employees.

Impact of flight route changes on cosmic ray exposure: consequences of the conflict between Ukraine and the Russian federation.

This work investigates the impact on cosmic ray exposures to aircrew due to changing flight routes operated in the context of the recent conflict between Ukraine and the Russian Federation. All analyses were done based on Paris-Tokyo and Tokyo-Paris flights taken as examples, and differences in radiation exposures were quantified by comparing the situation before and after the beginning of the conflict. Regarding space weather scenarios, a quiet solar period and an extreme solar event (ground level enhancement (GLE) 5) were considered in the study. Analyses showed that the new Paris-Tokyo flight route established after the beginning of the conflict results in a smaller radiation dose to aircrew than that operated before the conflict, particularly during solar events. In contrast, for Tokyo-Paris flights the new high-latitude route crossing the Atlantic Ocean and North America increases the dose significantly (+ 50% in the worst case). Although this analysis is limited only to flights connecting Paris and Tokyo, it allowed for an evaluation of the consequences of new routes (particularly polar ones) on ambient dose equivalent values.

Establishment of a headspace-thermal desorption and gas chromatography-mass spectrometry method (HS-TD-GC-MS) for simultaneous detection of 51 volatile organic compounds in human urine: Application in occupational exposure assessment.

Volatile organic compounds (VOCs) are a group of ubiquitous environment pollutants especially released into the workplace. Assessment of VOCs exposure in occupational populations is therefore a crucial issue for occupational health. However, simultaneous biomonitoring of a variety of VOCs is less studied. In this study, a simple and sensitive method was developed for the simultaneous determination of 51 prototype VOCs in urine by headspace-thermal desorption coupled to gas chromatography-mass spectrometry (HS-TD-GC-MS). The urinary sample was pretreated with only adding 0.50 g of sodium chloride to 2 mL of urine and 51 VOCs should be determined with limits of detection (LODs) between 13.6 ng/L and 24.5 ng/L. The method linearity ranged from 0.005 to 10 µg/L with correlation coefficients (r) of 0.991 to 0.999. The precision for intraday and inter-day, measured by the variation coefficient (CV) at three levels of concentration, was below 15 %, except for 4-isopropyl toluene, dichloromethane, and trichloromethane at low concentration. For medium and high levels, recoveries of all target VOCs were within the standard range, but 1,1-dichloropropene and styrene, which were slightly under 80 % at low levels. In addition, the proposed method has been used to determine urine samples collected in three times (before, during and after working) from 152 workers at four different factories. 41 types of prototype VOCs were detected in workers urine. Significant differences (Kruskal-Wallis chi-squared = 117.18, df = 1, P < 0.05) in the concentration levels of VOCs between the exposed and unexposed groups were observed, but not between the three sampling times (Kruskal-Wallis chi-squared = 3.39, df = 2, P = 0.183). The present study provides an alternative method for biomonitoring and assessing mixed exposures to VOCs in occupational populations.

Assessment of genotoxicity biomarkers in gasoline station attendants due to occupational exposure.

Gasoline station attendants are exposed to numerous chemicals that might have genotoxic and carcinogenic potential, such as benzene in fuel vapor and particulate matter and polycyclic aromatic hydrocarbons in vehicle exhaust emission. According to IARC, benzene and diesel particulates are Group 1 human carcinogens, and gasoline has been classified as Group 2A "possibly carcinogenic to humans." At gas stations, self-service is not implemented in Turkey; fuel-filling service is provided entirely by employees, and therefore they are exposed to those chemicals in the workplace during all working hours. Genetic monitoring of workers with occupational exposure to possible genotoxic agents allows early detection of cancer. We aimed to investigate the genotoxic damage due to exposures in gasoline station attendants in Turkey. Genotoxicity was evaluated by the Comet, chromosomal aberration, and cytokinesis-block micronucleus assays in peripheral blood lymphocytes. Gasoline station attendants (n = 53) had higher tail length, tail intensity, and tail moment values than controls (n = 61). In gasoline station attendants (n = 46), the frequencies of chromatid gaps, chromosome gaps, and total aberrations were higher compared with controls (n = 59). Increased frequencies of micronuclei and nucleoplasmic bridges were determined in gasoline station attendants (n = 47) compared with controls (n = 40). Factors such as age, duration of working, and smoking did not have any significant impact on genotoxic endpoints. Only exposure increased genotoxic damage in gasoline station attendants independently from demographic and clinical characteristics. Occupational exposure-related genotoxicity risk may increase in gasoline station attendants who are chronically exposed to gasoline and various chemicals in vehicle exhaust emissions.

Replace the Linear No-threshold Model with a Risk-informed Targeted Approach to Radiation Protection.

ABSTRACT: The linear no-threshold (LNT) model may be useful as a simple basis for developing radiation protection regulations and standards, but it bears little resemblance to scientific reality and is probably overly conservative at low doses and low dose rates. This paper is an appeal for a broader view of radiation protection that involves more than just optimization of radiation dose. It is suggested that the LNT model should be replaced with a risk-informed, targeted approach to limitation of overall risks, which include radiation and other types of risks and accidents/incidents. The focus should be on protection of the individual. Limitation of overall risk does not necessarily always equate to minimization of individual or collective doses, but in some cases it might. Instead, risk assessment (hazards analysis) should be performed for each facility/and or specific job or operation (straightforward for specialized work such as radiography), and this should guide how limited resources are used to protect workers and the public. A graded approach could be used to prioritize the most significant risks and identify exposure scenarios that are unlikely or non-existent. The dose limits would then represent an acceptable level of risk, below which no further reduction in dose would be needed. Less resources should be spent on ALARA and tracking small individual and collective doses. Present dose limits are thought to be conservative and should suffice in general. Two exceptions are possibly the need for a lower (lifetime) dose limit for lens of the eye for astronauts and raising the public limit to 5 mSv y -1 from 1 mSv y -1 . This would harmonize the public limit with the current limit for the embryo fetus of the declared pregnant worker. Eight case studies are presented that emphasize how diverse and complex radiation risks can be, and in some cases, chemical and industrial risks outweigh radiation risks. More focus is needed on prevention of accidents and incidents involving a variety of types of risks. A targeted approach is needed, and commitments should be complied with until they are changed or exemptions are granted. No criticism of regulators or nuclear industry personnel is intended here. Protection of workers and the public is everyone's goal. The question is how best to accomplish that.

Radiation protection in a cohort of healthcare workers: knowledge, attitude, practices, feelings and IR-exposure in French hospitals.

The number of healthcare workers occupationally exposed to ionizing radiation (IR) is increasing every year. As health effects from exposure to low doses IR have been reported, radiation protection (RP) in the context of occupational activities is a major concern. This study aims to assess the compliance of healthcare workers with RP policies, according to their registered cumulative dose, profession, and perception of radiation self-exposure and associated risk. Every healthcare worker from one of the participating hospitals in France with at least one dosimetric record for each year 2009, 2014, and 2019 in the SISERI registry was included and invited to complete an online questionnaire including information on the worker's occupational exposure, perception of IR-exposure risk and RP general knowledge. Hp(10) doses were provided by the SISERI system. Multivariate logistic regressions were used. Dosimeter wearing and RP practices compliance were strongly associated with 'feeling of being IR-exposed' (OR = 3.69, CI95% 2.04-6.66; OR = 4.60, CI95% 2.28-9.30, respectively). However, none of these factors was associated with RP training courses attendance. The main reason given for non-compliance is unsuitability or insufficient numbers of RP devices. This study provided useful information for RP policies. Making exposed workers aware of their own IR-exposure seems to be a key element to address in RP training courses. This type of questionnaire should be introduced into larger epidemiological studies. Dosimeter wearing and RP practices compliance are associated to feeling being IR-exposed. RP training courses should reinforce workers' awareness of their exposure to IR.

Aromatic amine antioxidants (AAs) and p-phenylenediamines-quinones (PPD-Qs) in e-waste recycling industry park: Occupational exposure and liver X receptors (LXRs) disruption potential.

Recently, evidence of aromatic amine antioxidants (AAs) existence in the dust of the electronic waste (e-waste) dismantling area has been exposed. However, there are limited studies investigating occupational exposure and toxicity associated with AAs and their transformation products (p-phenylenediamines-quinones, i.e., PPD-Qs). In this study, 115 dust and 42 hand wipe samples collected from an e-waste recycling industrial park in central China were analyzed for 19 AAs and 6 PPD-Qs. Notably, the median concentration of ∑6PPD-Qs (1,110 ng/g and 1,970 ng/m2) was significantly higher (p < 0.05, Mann-Whitney U test) than that of ∑6PPDs (147 ng/g and 34.0 ng/m2) in dust and hand wipes. Among the detected analytes, 4-phenylaminodiphenylamine quinone (DPPD-Q) (median: 781 ng/g) and 1,4-Bis(2-naphthylamino) benzene quinone (DNPD-Q) (median: 156 ng/g), were particularly prominent, which were first detected in the e-waste dismantling area. Occupational exposure assessments and nuclear receptor interference ability, conducted through estimated daily intake (EDI) and molecular docking analysis, respectively, indicated significant occupational exposure to PPD-Qs and suggested prioritized Liver X receptors (LXRs) disruption potential of PPDs and PPD-Qs. The study provides the first evidence of considerable levels of AAs and PPD-Qs in the e-waste-related hand wipe samples and underscores the importance of assessing occupational exposure and associated toxicity effects.

Occupational exposures among women beedi workers in Mysore District, India: A mixed-methods study protocol.

Beedi is the most common smoking form of tobacco used in India. The rolling of beedis is performed primarily by women in settings that lack occupational safeguards. The aims of this protocol are to establish methods for the study of occupational exposures among women beedi workers and their experiences and challenges working with unburnt tobacco. This protocol employs a convergent parallel mixed-methods approach. Qualitatively, we plan to explore the experiences and challenges faced by women beedi workers using photovoice, a community based participatory method. Occupational exposures to pesticides will be assessed through the use of silicone wristbands worn for seven days by workers, and exposure to toxic metals and metalloids will be assessed in dust samples collected in the homes of workers. The outcomes will be analyzed to form policy recommendations to improve the occupational health of women beedi workers.

Exploring the adverse effect of fine particulate matter (PM2.5) on wildland firefighters' pulmonary function and DNA damage.

Chiang Mai encounters severe pollution during the wildfire season. Wildland firefighters encounter various hazards while engaged in fire suppression operations, which encompass significant exposure to elevated concentrations of air pollutants resulting from combustion, especially particulate matter. The adverse effects of wildfire smoke on respiratory health are a significant concern. The objective of this study was to examine the potential adverse effects of PM2.5 exposure on the respiratory function and DNA damage of wildland firefighters. This prospective cohort study conducted in Chiang Mai from January to May 2022 planned to evaluate the health status of wildland firefighters during the pre-peak, peak, and post-peak ambient air pollution seasons. The measurement of PM2.5 was done at every forest fire station, as well as utilizing data from the Pollution Control Department. Participants received general health examinations, spirometry evaluations, and blood tests for DNA damage analysis. Pair t-tests and multiple regression models were used to examine the connection between pulmonary function parameters (FVC, FEV1) and PM2.5 concentration, with a significance level of P < 0.05. Thirty-three peak-season and twenty-one post-peak-season participants were enrolled. Four pre-peak-season wildland firefighters had FVC and FEV1 declines of > 15%. Multiple regression analysis showed a negative association between PM2.5 exposure and FVC% predicted (- 2.81%, 95% CI - 5.27 to - 0.34%, P = 0.027) and a marginally significant negative correlation with FVC (- 114.38 ml, 95% CI - 230.36 to 1.59 ml, P = 0.053). The remaining pulmonary measures showed a statistically insignificant decline. There were no significant changes in DNA damage detected. Wildland firefighters suffered a significant decline in pulmonary function associated with PM2.5 exposure. Spirometry is crucial for monitoring and promptly identifying respiratory issues that occur during wildfire seasons. Further research is recommended to explore DNA damage alterations and their potential association with PM2.5.

Alerts to improve occupational protection during Interventional Radiology. More attention is needed for simple but frequent procedures.

Occupational protection could be improved in interventional radiology. The monthly personal dosimetry cannot alert on some occupational doses with anomalous values for certain procedures. Active electronic personal dosimeters linked wireless to a dose management system (DMS), allow for the measurement of occupational doses per procedure, integrating this information with patient dose indicators and with technical and geometrical conditions of the procedures. We analysed around 3100 occupational dose values for individual procedures collected during the last two years, in an interventional radiology laboratory of a University Hospital and two groups, with patient doses higher than 100 Gy.cm2, and lower than 30 Gy.cm2. An unshielded reference dosimeter located at the C-arm registers the ambient dose equivalent (ADE) per procedure to be compared with the personal dose equivalent (PDE) over the apron. The ratio between both values PDE/ADE is a good indication of occupational protection. Alerts for occupational protection optimisation are suggested. For the full sample, 8.4 % of occupational doses measured over the protective apron of the interventionists were higher than 100 µSv and 3.8 % higher than 200 µSv per procedure. Occupational protection for complex procedures (>100 Gy.cm2) had median values of 46 µSv for PDE and 3.3 % for PDE/ADE. However, for simple procedures, (<30 Gy.cm2) the median values were 10 µSv and 28.4 %. This last percentage is 9 times higher than the value for complex procedures. This lack of protection should be corrected and the need to reduce some occupational doses reinforced in radiation protection training programmes for interventionists.

Public health assessment of Kenyan ASGM communities using multi-element biomonitoring, dietary and environmental evaluation.

The Kakamega gold belt's natural geological enrichment and artisanal and small-scale gold mining (ASGM) have resulted in food and environmental pollution, human exposure, and subsequent risks to health. This study aimed to characterise exposure pathways and risks among ASGM communities. Human hair, nails, urine, water, and staple food crops were collected and analysed from 144 ASGM miners and 25 people from the ASGM associated communities. Exposure to PHEs was predominantly via drinking water from mine shafts, springs and shallow-wells (for As>Pb>Cr>Al), with up to 366 µg L-1 arsenic measured in shaft waters consumed by miners. Additional exposure was via consumption of locally grown crops (for As>Ni>Pb>Cr>Cd>Hg>Al) besides inhalation of Hg vapour and dust, and direct dermal contact with Hg. Urinary elemental concentrations for both ASGM workers and wider ASGM communities were in nearly all cases above bioequivalents and reference upper thresholds for As, Cr, Hg, Ni, Pb and Sb, with median concentrations of 12.3, 0.4, 1.6, 5.1, 0.7 and 0.15 µg L-1, respectively. Urinary As concentrations showed a strong positive correlation (0.958) with As in drinking water. This study highlighted the importance of a multidisciplinary approach in integrating environmental, dietary, and public health investigations to better characterise the hazards and risks associated with ASGM and better understand the trade-offs associated with ASGM activities relating to public health and environmental sustainability. Further research is crucial, and study results have been shared with Public Health and Environmental authorities to inform mitigation efforts.

Evaluating workplace protection factors (WPFs) of different firefighter PPE interface control measures for select volatile organic compounds (VOCs).

Structural firefighters are exposed to a complex set of contaminants and combustion byproducts, including volatile organic compounds (VOCs). Additionally, recent studies have found structural firefighters' skin may be exposed to multiple chemical compounds via permeation or penetration of chemical byproducts through or around personal protective equipment (PPE). This mannequin-based study evaluated the effectiveness of four different PPE conditions with varying contamination control measures (incorporating PPE interface design features and particulate blocking materials) to protect against ingress of several VOCs in a smoke exposure chamber. We also investigated the effectiveness of long-sleeve base layer clothing to provide additional protection against skin contamination. Outside gear air concentrations were measured from within the smoke exposure chamber at the breathing zone, abdomen, and thigh heights. Personal air concentrations were collected from mannequins under PPE at the same general heights and under the base layer at abdomen and thigh heights. Sampled contaminants included benzene, toluene, styrene, and naphthalene. Results suggest that VOCs can readily penetrate the ensembles. Workplace protection factors (WPFs) were near one for benzene and toluene and increased with increasing molecular weight of the contaminants. WPFs were generally lower under hoods and jackets compared to under pants. For all PPE conditions, the pants appeared to provide the greatest overall protection against ingress of VOCs, but this may be due in part to the lower air concentrations toward the floor (and cuffs of pants) relative to the thigh-height outside gear concentrations used in calculating the WPFs. Providing added interface control measures and adding particulate-blocking materials appeared to provide a protective benefit against less-volatile chemicals, like naphthalene and styrene.

Potential risk assessment: a model for quality evaluation in fluoroscopy-guided interventional procedures.

This study presented a model applied for potential risk assessment in an interventional radiology setting. The model of potential risk assessment (MARP) consisted of the creation of a scale of indicators ranging from 0 to 5. The radiation levels were categorized according to gender, kind of procedure, value of kerma air product (Pka), and accumulated radiation dose (mGy). The MARP model was applied in 121 institutions over 8 y. A total of 201 656 patient radiation doses (Dose-area product and accumulated kerma) data were launched into the system over time, with an average of 22 406 doses per year. In the context of the workers (cardiologists, radiographers, and nurses) monitored during the MARP application, 8007 cases (with an average of 890 per year) of occupational radiation doses were recorded. This study showed a strategy for quality evaluation in fluoroscopy using a model with a compulsory information system for monitoring safety.

Radiological complexity of nuclear facilities: an information complexity approach to workplace monitoring.

Nuclear energy is crucial for achieving net-zero carbon emissions. A big challenge in the nuclear sector is ensuring the safety of radiation workers and the environment, while being cost-effective. Workplace monitoring is key to protecting workers from risks of ionising radiation. Traditional monitoring involves radiological surveillance via installed radiation monitors, continuously recording measurements like radiation fields and airborne particulate radioactivity concentrations, especially where sudden radiation changes could significantly impact workers. However, this approach struggles to detect incremental changes over a long period of time in the radiological measurements of the facility. To address this limitation, we propose abstracting a nuclear facility as a complex system. We then quantify the information complexity of the facility's radiological measurements using an entropic metric. Our findings indicate that the inferences and interpretations from our abstraction have a firm basis for interpretation and can enhance current workplace monitoring systems. We suggest the implementation of a radiological complexity-based alarm system to complement existing radiation level-based systems. The abstraction synthesized here is independent of the type of nuclear facility, and hence is a general approach to workplace monitoring at a nuclear facility.

Rapid determination of hippuric acid as an exposure biomarker of toluene using a colorimetric assay and comparison with high-performance liquid chromatography.

Occupational exposure to toluene is associated with health risks that require reliable monitoring methods. Hippuric acid (HA), a urinary metabolite of toluene, serves as a valuable biomarker for such exposure. Colorimetric methods for the quantitative determination of HA have gained prominence due to their simplicity, cost-effectiveness, and suitability for field application. In the present study, a simple colorimetric technique was optimized for the determination of HA in the urine sample, and compared with a usual HPLC technique. The central composite design (CCD) was applied to examine the effective parameters on the colorimetric determination of HA. The calibration curve for HA was established within the concentration range of 6 to 100 mg L-1 with R2 = 0.97. The detection limit (LOD) and quantification limit (LOQ) were determined to be 1.8 mg L-1 and 6 mg L-1 respectively. The relative standard deviation (RSD%) was less than 5%, and the recovery% (R%) was 90.5-100.1. The overall results showed good agreement between the colorimetric and HPLC results. There was a significant relationship between the results obtained from HPLC and colorimetric methods especially for higher concentration levels of HA (≥ 500 mg/g creatinine). In conclusion, our optimized colorimetric method is a simple, cost-effective, and rapid method for determination of HA in occupational exposure, which is comparable with the HPLC technique.

Exposure to benzene, toluene, ethylbenzene, and xylene (BTEX) at Nigeria's petrol stations: a review of current status, challenges and future directions.

Introduction: In Nigeria, because of increasing population, urbanization, industrialization, and auto-mobilization, petrol is the most everyday non-edible commodity, and it is the leading petroleum product traded at the proliferating Nigeria's petrol stations (NPSs). However, because of inadequate occupational health and safety (OHS) regulatory measures, working at NPSs exposes petrol station workers (PSWs) to a large amount of hazardous benzene, toluene, ethylbenzene, and xylene (BTEX) compounds. Methods: Studies on BTEX exposures among Nigerian PSWs are scarce. Thus, constraints in quantifying the health risks of BTEX limit stakeholders' ability to design practical risk assessment and risk control strategies. This paper reviews studies on the OHS of Nigerian PSWs at the NPSs. Results: Although knowledge, attitude, and practices on OHS in NPSs vary from one Nigeria's study setting to another, generally, safety practices, awareness about hazards and personal protective equipment (PPE), and the use of PPE among PSWs fell below expectations. Additionally, air quality at NPSs was poor, with a high content of BTEX and levels of carbon monoxide, hydrogen sulfide, particulate matter, and formaldehyde higher than the World Health Organization guideline limits. Discussion: Currently, regulatory bodies' effectiveness and accountability in safeguarding OHS at NPSs leave much to be desired. Understanding the OHS of NPSs would inform future initiatives, policies, and regulations that would promote the health and safety of workers at NPSs. However, further studies need to be conducted to describe the vulnerability of PSWs and other Nigerians who are occupationally exposed to BTEX pollution. More importantly, controlling air pollution from hazardous air pollutants like BTEX is an essential component of OHS and integral to attaining the Sustainable Development Goals (SDG) 3, 7, and 11.

Development of Nontargeted Workflow of Occupational Exposure by Infrared Ion Spectroscopy and Silicone Wristbands' Passive Sampling.

A new approach using orthogonal analytical techniques is developed for chemical identification. High resolution mass spectrometry and infrared ion spectroscopy are applied through a 5-level confidence paradigm to demonstrate the effectiveness of nontargeted workflow for the identification of hazardous organophosphates. Triphenyl phosphate is used as a surrogate organophosphate for occupational exposure, and silicone wristbands are used to represent personal samplers. Spectral data of a target compound is combined with spectral data of the sodium adduct and quantum chemical calculations to achieve a confirmed identification. Here, we demonstrate a nontargeted workflow that identifies organophosphate exposure and provides a mechanism for selecting validated methods for quantitative analyses.

Evaluating radiofrequency electromagnetic field exposure in confined spaces: a systematic review of recent studies and future directions.

This study reviews recent research on Radiofrequency Electromagnetic Field (RF-EMF) exposure in confined environments, focusing on methodologies and parameters. Studies typically evaluate RF-EMF exposure using an electric field and specific absorption rate but fail to consider temperature rise in the tissues in confined environments. The study highlights the investigation of RF-EMF exposure in subterranean environments such as subways, tunnels and mines. Future research should evaluate the exposure of communication devices in such environments, considering the surrounding environment. Such studies will aid in understanding the risks and developing effective mitigation strategies to protect workers and the general public.